Key Takeaways
- 1South African customs (SARS) requires an importer to register and obtain an importer's code before importing.
- 2The core shipping set is a commercial invoice, packing list, bill of lading and, for sea freight, an insurance certificate; the ITA guide lists a Declaration of Origin (DA59) where a reduced duty rate is claimed.
- 3ITAC import permits apply to restricted goods, and must be held before the date of shipment.
- 4The NRCS Letter of Authority applies only to products covered by a compulsory specification; SARS sets the requirement by tariff heading, so check yours.
- 5Refractory bricks ship under HS 6902, unshaped products (castables, mortars, ramming mass) under HS 3816, ceramic fibre under HS 6806.
Sizing a job like this? Send your furnace type, temperature and quantity. An engineer replies with grade and price, usually the same day.
South Africa's steel, cement, foundry and aluminium plants import refractories as well as buying locally. This guide sets out the customs steps a buyer should check, with the official or government source for each point. Rules and tariff lists change, so confirm each with your clearing agent before ordering.
Register as an Importer
According to the US International Trade Administration's South Africa import requirements guide (updated June 2026), SARS customs requires that an importer register with it and obtain an importer's code.
The Shipping Documents
The same guide lists the documents that accompany an import:
- Commercial invoice stating the correct shipment value (zero-value invoices are not accepted).
- Bill of lading and packing list.
- Insurance certificate for sea freight.
- Declaration of Origin (DA59) where a lower than general duty rate is claimed.
- The customs declaration (the Single Administrative Document).
For refractories, also ask for the manufacturer's material test certificate and the technical data sheet for each grade. Our export documents checklist lists the full set.
ITAC Permits and NRCS Approval
The ITA guide says importers must hold an ITAC import permit before the date of shipment where one is required for restricted goods. Separately, the National Regulator for Compulsory Specifications (NRCS) says SARS often requires evidence of NRCS approval, the Letter of Authority, before releasing regulated products at the port. See the NRCS industry page. SARS publishes the tariff headings concerned in its prohibited and restricted imports and exports list, which changes often. We do not assume that refractories are or are not on it; check the heading for your product.
HS Codes
- Refractory bricks and shapes: HS 6902
- Other refractory ceramic goods (nozzles, sleeves, tubes): HS 6903
- Castables, mortars, gunning mix and ramming mass: HS 3816
- Ceramic fibre blanket, modules and boards: HS 6806
Fire Bricks and Refractory Cement in the Industrial Sense
South African searches for "fire bricks" and "refractory cement" include household use. For industrial furnaces, kilns and boilers, the right products are fireclay bricks and high alumina bricks, and castable refractory (what buyers often call refractory cement, though strictly the cement is only the binder). See our fire bricks and castable refractory pages.
SAPL Supply for South Africa
Shanker Agencies exports refractory bricks, castables, ramming mass, ceramic fibre and flow control products to South African industrial buyers, with the manufacturer's test certificate. Shipments go to Durban. See the Johannesburg supply page, the South Africa market overview and the exporter page, or submit an RFQ with your plant type, grade and port.
Need Expert Refractory Advice?
45+ years of expertise ยท Authorized CUMI, Crown Ceramics & Divine Cerawool dealer
Have questions about the topics in this article? Our refractory engineers review your specific application and recommend the right solution, no obligation.
Frequently Asked Questions
What does a South African importer need to register?
South African Revenue Service (SARS) customs requires an importer to register with it and obtain an importer's code, according to the US International Trade Administration's South Africa import guide.
Do refractories need an ITAC import permit?
ITAC import permits apply to restricted goods and must be held before the date of shipment. Whether your refractory product is on the restricted list should be confirmed against the SARS prohibited and restricted list or with your clearing agent.
Do refractories need an NRCS Letter of Authority?
An NRCS Letter of Authority is needed for products covered by a compulsory specification. SARS sets the requirement per tariff heading in its prohibited and restricted list. Check the heading for your product, or ask your clearing agent, before the cargo ships.
Is a certificate of origin needed for South Africa?
The ITA guide lists a Declaration of Origin (DA59) for cases where a lower than general duty rate is claimed. Tell us at the enquiry stage if you will claim one, so the origin documents are prepared with the shipment.