Unshaped Refractories / Ramming Mass
Silica Ramming Mass
Silica is a grade in Shanker Agencies’ ramming mass range, rated for continuous service to 1650°C.
Silica technical specification
Typical values for Silica ramming mass. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
Where Silica is used
Is Silica right for your application?
- Rated for continuous service up to 1650°C.
Compare Silica with other grades▾
Compare Silica against every grade SAPL stocks in this family.
Swipe to compare grades
| Grade | SiO₂ content | Bulk density | Application | Max service temperature |
|---|---|---|---|---|
| Silicathis grade | 95-98% | 1.90 g/cc | Cast iron induction furnace | 1650°C |
| Alumina | - | 2.70-2.92 g/cc | Steel induction furnace, stainless steel | 1750°C |
| Magnesia | - | 2.90 g/cc | Basic/alloy steel furnaces | 1750°C |
| Acidic | 88-92% | 1.85 g/cc | Non-ferrous / cast iron | 1600°C |
| Dolomite | - | - | AOD and ladle back-filling, knuckle joints, well block surround | 1700°C |
Send the drawing, dimensions, application and quantity for Silica ramming mass. Our technical team reviews the requirement and advises on grade and fulfilment route.
Request Silica QuoteGrade designations & equivalents▾
How Silica is referenced across Indian and export naming conventions.
| SAPL grade code | Silica |
| Max service temperature | 1650°C |
Installation notes
- 1Clean furnace shell and apply one coat of release agent before ramming
- 2Ram in 50–75 mm layers using the correct pattern (spiral from bottom up)
- 3Each layer must be uniformly compacted, check with density gauge if available
- 4For induction furnaces: sinter with a gradual heat-up using scrap metal charge
- 5First heat: fill with metal charge, heat slowly to operating temperature, do not tap
- 6Typical sintering cycle: 4–8 hrs at full power to form a glassy bonded shell
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.