Acid Proofing / Acid Resistant Tiles
Standard 150mm Acid Resistant Tiles
Standard 150mm is a grade in Shanker Agencies’ acid resistant tiles range.
Grade
Standard 150mm
Standard 150mm technical specification
Typical values for Standard 150mm acid resistant tiles. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
| Property | Standard 150mm |
|---|---|
| Size | 150×150×10mm |
| Water absorption | <0.5% |
| Acid resistance | 99% |
| Finish | Smooth |
| Typical use | General chemical floor |
Where Standard 150mm is used
Chemical plant floor areas
Effluent treatment plant floor & walls
Laboratory benches and floors
Battery charging rooms
Pickle line floor (steel plants)
Pharma clean-room floors
Drainage channel invert lining
Loading bay floors (chemical spill protection)
Full acid resistant tiles range
Compare Standard 150mm against every grade SAPL stocks in this family.
| Grade | Size | Water absorption | Acid resistance | Finish | Typical use |
|---|---|---|---|---|---|
| Standard 150mm | 150×150×10mm | <0.5% | 99% | Smooth | General chemical floor |
| Heavy Duty 200mm | 200×200×20mm | <0.5% | 99% | Smooth | High-traffic chemical floors |
| Anti-Skid | 150×150×10mm | <0.5% | 99% | Textured | Wet areas, walkways |
| Channel Invert | Custom | <0.5% | 99% | Smooth | Effluent channel invert |
Installation notes
- 1Substrate: smooth, level concrete (± 3mm in 3m), grind high spots, fill low spots with epoxy mortar
- 2Use only acid-resistant tile adhesive mortar (furan-based for strong acids, potassium silicate for milder duty)
- 3Lay tiles with minimum 3mm joint width, do not butt joint
- 4Grout all joints with acid-resistant grout immediately after tile adhesive has set (24–48 hrs)
- 5Seal around drains and wall junctions with acid-resistant flexible sealant
- 6Cure for 5–7 days before any chemical exposure
- 7Test: cover with dilute acid solution for 24 hours before commissioning
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.