Acid Proofing / Acid Resistant Tiles
Anti-Skid Acid Resistant Tiles
Anti-Skid is a grade in Shanker Agencies’ acid resistant tiles range.
Grade
Anti-Skid
Anti-Skid technical specification
Typical values for Anti-Skid acid resistant tiles. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
| Property | Anti-Skid |
|---|---|
| Size | 150×150×10mm |
| Water absorption | <0.5% |
| Acid resistance | 99% |
| Finish | Textured |
| Typical use | Wet areas, walkways |
Where Anti-Skid is used
Chemical plant floor areas
Effluent treatment plant floor & walls
Laboratory benches and floors
Battery charging rooms
Pickle line floor (steel plants)
Pharma clean-room floors
Drainage channel invert lining
Loading bay floors (chemical spill protection)
Full acid resistant tiles range
Compare Anti-Skid against every grade SAPL stocks in this family.
| Grade | Size | Water absorption | Acid resistance | Finish | Typical use |
|---|---|---|---|---|---|
| Standard 150mm | 150×150×10mm | <0.5% | 99% | Smooth | General chemical floor |
| Heavy Duty 200mm | 200×200×20mm | <0.5% | 99% | Smooth | High-traffic chemical floors |
| Anti-Skid | 150×150×10mm | <0.5% | 99% | Textured | Wet areas, walkways |
| Channel Invert | Custom | <0.5% | 99% | Smooth | Effluent channel invert |
Installation notes
- 1Substrate: smooth, level concrete (± 3mm in 3m), grind high spots, fill low spots with epoxy mortar
- 2Use only acid-resistant tile adhesive mortar (furan-based for strong acids, potassium silicate for milder duty)
- 3Lay tiles with minimum 3mm joint width, do not butt joint
- 4Grout all joints with acid-resistant grout immediately after tile adhesive has set (24–48 hrs)
- 5Seal around drains and wall junctions with acid-resistant flexible sealant
- 6Cure for 5–7 days before any chemical exposure
- 7Test: cover with dilute acid solution for 24 hours before commissioning
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.