Unshaped Refractories / Gunning Materials
Tundish Spraying Mass Gunning Materials
Tundish Spraying Mass is the 70-75% MgO grade in Shanker Agencies’ gunning materials range, rated for continuous service to 1650°C.
Tundish Spraying Mass technical specification
Typical values for Tundish Spraying Mass gunning materials. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
Where Tundish Spraying Mass is used
Is Tundish Spraying Mass right for your application?
- Rated for continuous service up to 1650°C.
Compare Tundish Spraying Mass with other grades▾
Compare Tundish Spraying Mass against every grade SAPL stocks in this family.
Swipe to compare grades
| Grade | MgO content | Rebound loss | Bulk density | Max service temperature |
|---|---|---|---|---|
| LC Gun Mix | - | 15-20% | 2.50 g/cc | 1700°C |
| HA Gun Mix | - | 18-22% | 2.70 g/cc | 1750°C |
| Mag Gun Mix | 80-85% | 20-25% | 2.80 g/cc | 1750°C |
| Silica Gun Mix | - | 15-20% | 1.90 g/cc | 1650°C |
| Tundish Spraying Massthis grade | 70-75% | — | 1.77-1.84 g/cc (dried/fired) | 1650°C |
Send the drawing, dimensions, application and quantity for Tundish Spraying Mass gunning materials. Our technical team reviews the requirement and advises on grade and fulfilment route.
Request Tundish Spraying Mass QuoteGrade designations & equivalents▾
How Tundish Spraying Mass is referenced across Indian and export naming conventions.
| SAPL grade code | Tundish Spraying Mass |
| Max service temperature | 1650°C |
Installation notes
- 1Ensure gunning machine is calibrated for correct air pressure (3–5 bar) and water addition
- 2Clean eroded surface, remove loose material and wash with air jet before gunning
- 3Apply in thin layers (25–50 mm per pass) to prevent slumping on vertical surfaces
- 4Allow each layer to set before applying the next
- 5Water ring position is critical, adjust to achieve optimal wet/dry gunning consistency
- 6Preheat repair area to 200–400°C before gunning on cold substrate
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.