Unshaped Refractories / Gunning Materials
LC Gun Mix Gunning Materials
LC Gun Mix is the 70-75% Al₂O₃ grade in Shanker Agencies’ gunning materials range, rated for continuous service to 1700°C.
LC Gun Mix technical specification
Typical values for LC Gun Mix gunning materials. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
Where LC Gun Mix is used
Is LC Gun Mix right for your application?
- Rated for continuous service up to 1700°C.
Compare LC Gun Mix with other grades▾
Compare LC Gun Mix against every grade SAPL stocks in this family.
Swipe to compare grades
| Grade | Al₂O₃ content | Rebound loss | Bulk density | Max service temperature |
|---|---|---|---|---|
| LC Gun Mixthis grade | 70-75% | 15-20% | 2.50 g/cc | 1700°C |
| HA Gun Mix | 80-85% | 18-22% | 2.70 g/cc | 1750°C |
| Mag Gun Mix | - | 20-25% | 2.80 g/cc | 1750°C |
| Silica Gun Mix | - | 15-20% | 1.90 g/cc | 1650°C |
| Tundish Spraying Mass | - | — | 1.77-1.84 g/cc (dried/fired) | 1650°C |
Send the drawing, dimensions, application and quantity for LC Gun Mix gunning materials. Our technical team reviews the requirement and advises on grade and fulfilment route.
Request LC Gun Mix QuoteGrade designations & equivalents▾
How LC Gun Mix is referenced across Indian and export naming conventions.
| SAPL grade code | LC Gun Mix |
| Alumina content | 70-75% Al₂O₃ |
| Max service temperature | 1700°C |
Installation notes
- 1Ensure gunning machine is calibrated for correct air pressure (3–5 bar) and water addition
- 2Clean eroded surface, remove loose material and wash with air jet before gunning
- 3Apply in thin layers (25–50 mm per pass) to prevent slumping on vertical surfaces
- 4Allow each layer to set before applying the next
- 5Water ring position is critical, adjust to achieve optimal wet/dry gunning consistency
- 6Preheat repair area to 200–400°C before gunning on cold substrate
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.