Acid Proofing / Acid Proof Bricks
Class III Acid Proof Bricks
Class III is a grade in Shanker Agencies’ acid proof bricks range.
Class III technical specification
Typical values for Class III acid proof bricks. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
Where Class III is used
Compare Class III with other grades▾
Compare Class III against every grade SAPL stocks in this family.
Swipe to compare grades
| Grade | Water absorption | Acid resistance | Alkali resistance | Cold crushing strength | Size |
|---|---|---|---|---|---|
| Class I | 3-6% | 97% min | 75% | 40 MPa | 230×113×65mm std |
| Class II | <2% | 99% min | 85% | 50 MPa | 230×113×65mm std |
| Class IIIthis grade | <0.5% | 99.5% min | 90% | 55 MPa | Custom |
| Carbon-Fill | <1% | 99.5% min | 95% | 45 MPa | Standard + custom |
| Anti-static | <2% | 99% min | 85% | 45 MPa | 230×113×65mm std |
Send the drawing, dimensions, application and quantity for Class III acid proof bricks. Our technical team reviews the requirement and advises on grade and fulfilment route.
Request Class III QuoteInstallation notes
- 1Surface preparation: concrete or steel substrate must be clean, dry, and free of oil/grease
- 2Apply primer coat, epoxy primer for steel, concrete primer for concrete substrate
- 3Use appropriate acid-resistant cement: furan resin (best acid resistance), phenolic resin, or potassium silicate
- 4Bed mortar thickness: 3–6 mm, applied to both brick and substrate (buttered joint)
- 5Joint width: 3–6 mm, fully filled with acid-resistant mortar
- 6Curing: furan resin mortars, 24 hrs at 25°C before any chemical exposure; heat curing improves performance
- 7Test before commissioning: hydraulic leak test or chemical spot test
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.