Insulation / Ceramic Fiber Products
1600 Module Ceramic Fiber Products
1600 Module is a grade in Shanker Agencies’ ceramic fiber products range.
Grade
1600 Module
Max service temperature
1600°C
Bulk density
160-200 kg/m³
1600 Module technical specification
Typical values for 1600 Module ceramic fiber products. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
| Property | 1600 Module |
|---|---|
| Max service temperature | 1600°C |
| Bulk density | 160-200 kg/m³ |
| Thermal conductivity at 500°C | 0.12 W/mK |
| Tensile strength | — |
| Form | Module (300×300mm) |
Where 1600 Module is used
Car-bottom and bogie hearth furnace lining
Continuous annealing furnace roof & walls
Heat treatment furnace complete lining
Backup insulation in steel ladle covers
Expansion joints in kiln linings
Petrochemical reformer furnace casing insulation
Torpedo car cover insulation
Industrial boiler casing insulation
Full ceramic fiber products range
Compare 1600 Module against every grade SAPL stocks in this family.
| Grade | Max service temperature | Bulk density | Thermal conductivity at 500°C | Tensile strength | Form |
|---|---|---|---|---|---|
| 1260 Blanket | 1260°C | 96-128 kg/m³ | 0.08 W/mK | 30 kPa | Roll (7.3m × 610mm) |
| 1400 Blanket | 1400°C | 96-128 kg/m³ | 0.10 W/mK | 35 kPa | Roll (7.3m × 610mm) |
| 1600 Module | 1600°C | 160-200 kg/m³ | 0.12 W/mK | — | Module (300×300mm) |
| 1260 Board | 1260°C | 300-350 kg/m³ | 0.12 W/mK | 200 kPa | Sheet (1000×500mm) |
| Vacuum Formed | 1400°C | 350-400 kg/m³ | 0.14 W/mK | 300 kPa | Custom shapes |
| Ceramic Paper | 1260°C | 160-200 kg/m³ | 0.10 W/mK | — | Roll (5m × 300mm) |
Installation notes
- 1Blanket: wrap around cylindrical vessels or layer on flat surfaces, overlap joints by 50 mm
- 2Modules: attach to shell plate using stud welding, butt joints, no gaps
- 3Boards: cut with hand saw or angle grinder, wear respiratory protection when cutting fibres
- 4Expansion gaps: ceramic fiber requires no expansion gaps (it compresses and expands freely)
- 5Anchoring: stainless steel stud anchors every 300–400 mm for overhead and vertical applications
- 6Vapour barrier: apply rigidiser or colloidal silica coating on hot face to prevent fibre erosion in high-velocity gas applications
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.