+91 98999 57888

Unshaped Refractories / Plastic Refractories

Clay Plastic Plastic Refractories

Clay Plastic is the 42-48% Al₂O₃ grade in Shanker Agencies’ plastic refractories range, rated for continuous service to 1400°C.

Request Clay Plastic QuoteCall +91 98999 57888
Clay Plastic grade plastic refractories supplied by Shanker Agencies
Grade
Clay Plastic
Al₂O₃ content
42-48%
Max service temperature
1400°C
Cold crushing strength
30 MPa
Bulk density
2.2 g/cc

Clay Plastic technical specification

Typical values for Clay Plastic plastic refractories. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.

Al₂O₃ content
42-48%
Bulk density
2.2 g/cc
Cold crushing strength
30 MPa
Max service temperature
1400°C

Where Clay Plastic is used

Burner blocks & burner quarlsBoiler & furnace wall patchingCement kiln hood & nose ring repairReheating furnace localised repairLadle & launder patchingMonolithic linings around tubes & penetrations

Is Clay Plastic right for your application?

  • Rated for continuous service up to 1400°C.
Compare Clay Plastic with other grades▾

Compare Clay Plastic against every grade SAPL stocks in this family.

Swipe to compare grades

GradeAl₂O₃ contentBulk densityCold crushing strengthMax service temperature
Clay Plasticthis grade42-48%2.2 g/cc30 MPa1400°C
HA-70 Plastic68-72%2.5 g/cc50 MPa1700°C
HA-80 Plastic78-82%2.7 g/cc70 MPa1800°C
HA-70 Plastic →

Send the drawing, dimensions, application and quantity for Clay Plastic plastic refractories. Our technical team reviews the requirement and advises on grade and fulfilment route.

Request Clay Plastic Quote
Grade designations & equivalents▾

How Clay Plastic is referenced across Indian and export naming conventions.

SAPL grade codeClay Plastic
Alumina content42-48% Al₂O₃
Max service temperature1400°C

Installation notes

  1. 1Supplied ready to use, do not add water to phosphate-bonded grades
  2. 2Ram in 25–50 mm layers with a pneumatic rammer; key into anchors for vertical/overhead work
  3. 3Cut vent holes for moisture/volatile escape before heat-up
  4. 4Controlled dry-out: 30°C/hr to 350°C with holds; phosphate bond develops strength on first firing

Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.