Insulation / Microporous Insulation
Flexible Panel Microporous Insulation
Flexible Panel is a grade in Shanker Agenciesā microporous insulation range.
Grade
Flexible Panel
Max service temperature
1000Ā°C
Bulk density
280 kg/mĀ³
Flexible Panel technical specification
Typical values for Flexible Panel microporous insulation. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
| Property | Flexible Panel |
|---|---|
| Thermal conductivity | 0.025 W/mK |
| Max service temperature | 1000Ā°C |
| Bulk density | 280 kg/mĀ³ |
| Form | Encapsulated panel |
Where Flexible Panel is used
Steel ladle & tundish back-up insulation
Furnace back-up lining in space-constrained shells
Foundry & investment casting insulation
Kiln car back-up insulation
High-temperature process equipment heat shields
Energy-storage & thermal-barrier applications
Full microporous insulation range
Compare Flexible Panel against every grade SAPL stocks in this family.
| Grade | Thermal conductivity | Max service temperature | Bulk density | Form |
|---|---|---|---|---|
| Board | 0.022 W/mK | 1000Ā°C | 320 kg/mĀ³ | Rigid board |
| Flexible Panel | 0.025 W/mK | 1000Ā°C | 280 kg/mĀ³ | Encapsulated panel |
| Machinable Block | 0.028 W/mK | 1000Ā°C | 420 kg/mĀ³ | Block |
Installation notes
- 1Cut boards with a fine-tooth saw; wear respiratory protection for dust
- 2Install as a back-up layer behind the dense/fibre hot-face lining, never on the hot face
- 3Keep panels dry; encapsulated/foil-faced grades resist handling damage
- 4Use to cut shell temperature or save lining thickness where space is limited
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.