Insulation / Ceramic Fiber Products

Rope Ceramic Fiber Products

Rope is a grade in Shanker Agencies’ ceramic fiber products range.

Request Rope Quote Call +91 98999 57888

Grade

Rope

Max service temperature

1260°C

Bulk density

—

Rope technical specification

Typical values for Rope ceramic fiber products. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.

Max service temperature

1260°C

Bulk density

—

Thermal conductivity at 500°C

—

Tensile strength

—

Form

Round / square / twisted; glass or SS reinforced

Where Rope is used

Blanket: furnace wall & roof lining, boiler casing, pipe and duct wrappingModule: full hot-face lining for heat treatment and annealing furnaces (stud-welded)Board & vacuum-formed shapes: rigid backup insulation, burner blocks, custom hot-face shapesPaper: gaskets, thin thermal barriers, hot-face separatorsRope: furnace and kiln door seals, flange gaskets, expansion joint packing, cable/pipe penetration sealsBulk wool: packing irregular voids, expansion joints, filling cavities behind brickworkPetrochemical reformer furnace casing insulationSteel ladle cover and torpedo car cover insulation

Is Rope right for your application?

Rated for continuous service up to 1260°C.

Compare Rope with other grades▾

Compare Rope against every grade SAPL stocks in this family.

Swipe to compare grades

Grade	Max service temperature	Bulk density	Thermal conductivity at 500°C	Tensile strength	Form
Blanket RT-1260	1260°C	64–160 kg/m³	0.15 W/mK @128 kg/m³, 600°C	60 kPa min	Roll 13/25mm × 610 × 7300–7620mm
Blanket HTZ-1425	1425°C	64–160 kg/m³	0.15 W/mK @128 kg/m³, 600°C	60 kPa min	Roll 50mm × 610 × 3650–3810mm
Module	1260 / 1425°C	160–200 kg/m³	—	—	Folded module, stud-welded
Board	1260 / 1425°C	300–350 kg/m³	—	—	Rigid sheet
Vacuum Formed	1260 / 1425°C	350–400 kg/m³	—	—	Custom shapes to drawing
Paper	1260°C	160–200 kg/m³	—	—	Roll, gasket/seal use
Ropethis grade	1260°C	—	—	—	Round / square / twisted; glass or SS reinforced
Bulk Wool	1260 / 1425°C	—	—	—	Loose fill, packing voids

← Paper Bulk Wool →

Send the drawing, dimensions, application and quantity for Rope ceramic fiber products. Our technical team reviews the requirement and advises on grade and fulfilment route.

Request Rope Quote

Installation notes

1Blanket: wrap around cylindrical vessels or layer on flat surfaces, overlap joints by 50 mm
2Modules: attach to shell plate using stud welding, butt joints, no gaps
3Boards: cut with hand saw or angle grinder, wear respiratory protection when cutting fibres
4Expansion gaps: ceramic fiber requires no expansion gaps (it compresses and expands freely)
5Anchoring: stainless steel stud anchors every 300–400 mm for overhead and vertical applications
6Vapour barrier: apply rigidiser or colloidal silica coating on hot face to prevent fibre erosion in high-velocity gas applications

Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.