Insulation / Ceramic Fiber Products

Board LT-1050 Ceramic Fiber Products

Board LT-1050 is a grade in Shanker Agencies’ ceramic fiber products range.

Request Board LT-1050 Quote Call +91 98999 57888

Grade

Board LT-1050

Max service temperature

1050°C class

Bulk density

300–370 kg/m³

Board LT-1050 technical specification

Typical values for Board LT-1050 ceramic fiber products. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.

Max service temperature

1050°C class

Bulk density

300–370 kg/m³

Thermal conductivity at 500°C

—

Tensile strength

2.8 kg/cm² @10% deform

Form

Rigid sheet 12/25/50mm

Where Board LT-1050 is used

Blanket: furnace wall & roof lining, boiler casing, pipe and duct wrappingModule: full hot-face lining for heat treatment and annealing furnaces (stud-welded)Board & vacuum-formed shapes: rigid backup insulation, burner blocks, custom hot-face shapesPaper: gaskets, thin thermal barriers, hot-face separatorsRope: furnace and kiln door seals, flange gaskets, expansion joint packing, cable/pipe penetration sealsBulk wool: packing irregular voids, expansion joints, filling cavities behind brickworkPetrochemical reformer furnace casing insulationSteel ladle cover and torpedo car cover insulation

Is Board LT-1050 right for your application?

Rated for continuous service up to 1050°C class.

Compare Board LT-1050 with other grades▾

Compare Board LT-1050 against every grade SAPL stocks in this family.

Swipe to compare grades

Grade	Max service temperature	Bulk density	Thermal conductivity at 500°C	Tensile strength	Form
Blanket RT-1260	1260°C class / 1050°C continuous	64, 96, 128, 160 kg/m³	0.15 W/mK @128 kg/m³, 600°C	60 kPa min	Roll 13/25mm × 610 × 7300–7620mm
Blanket HT-1425	1425°C class / 1350°C continuous	64, 96, 128, 160 kg/m³	0.16 W/mK @128 kg/m³, 600°C	60 kPa min	Roll 50mm × 610 × 3650–3810mm
Module	1260 / 1425°C	160–200 kg/m³	—	—	Folded module, stud-welded
Board LT-1050this grade	1050°C class	300–370 kg/m³	—	2.8 kg/cm² @10% deform	Rigid sheet 12/25/50mm
Board RT-1260	1260°C class	320–380 kg/m³	—	2.8 kg/cm² @10% deform	Rigid sheet 12/25/50mm
Board HTZ-1425	1425°C class	320–380 kg/m³	—	2.8 kg/cm² @10% deform	Rigid sheet 12/25/50mm
Vacuum Formed	1260 / 1425°C	350–400 kg/m³	—	—	Custom shapes to drawing
Paper	1260°C	160–200 kg/m³	—	—	Roll, gasket/seal use
Rope	1260°C	—	—	—	Round / square / twisted; glass or SS reinforced
Bulk Wool	1260 / 1425°C	—	—	—	Loose fill, packing voids

← Module Board RT-1260 →

Send the drawing, dimensions, application and quantity for Board LT-1050 ceramic fiber products. Our technical team reviews the requirement and advises on grade and fulfilment route.

Request Board LT-1050 Quote

Installation notes

1Blanket: wrap around cylindrical vessels or layer on flat surfaces, overlap joints by 50 mm
2Modules: attach to shell plate using stud welding, butt joints, no gaps
3Boards: cut with hand saw or angle grinder, wear respiratory protection when cutting fibres
4Expansion gaps: ceramic fiber requires no expansion gaps (it compresses and expands freely)
5Anchoring: stainless steel stud anchors every 300–400 mm for overhead and vertical applications
6Vapour barrier: apply rigidiser or colloidal silica coating on hot face to prevent fibre erosion in high-velocity gas applications

Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.