Acid Proofing / Acid Proof Cement
Furan Resin Acid Proof Cement
Furan Resin is a grade in Shanker Agencies’ acid proof cement range.
Grade
Furan Resin
Max service temperature
170°C
Cold crushing strength
30 MPa
Furan Resin technical specification
Typical values for Furan Resin acid proof cement. Test methods vary by property and product family, so confirm the applicable standard against the manufacturer datasheet before specifying.
| Property | Furan Resin |
|---|---|
| Acid resistance | >98% |
| Max service temperature | 170°C |
| Cold crushing strength | 30 MPa |
| Typical use | Acid + alkali / organic |
Where Furan Resin is used
Bedding & jointing acid-proof bricks and tiles
Chemical plant floor linings
Acid storage tank linings
Absorption & scrubbing towers
Pickling tank linings
Effluent/ETP channels & chimney linings
Full acid proof cement range
Compare Furan Resin against every grade SAPL stocks in this family.
| Grade | Acid resistance | Max service temperature | Cold crushing strength | Typical use |
|---|---|---|---|---|
| Sodium-Silicate | >96% | 1000°C | 20 MPa | Mineral acid service |
| Potassium-Silicate | >97% | 1000°C | 25 MPa | High-temp acid service |
| Furan Resin | >98% | 170°C | 30 MPa | Acid + alkali / organic |
Installation notes
- 1Mix silicate cement with hardener strictly per ratio; use within pot life
- 2Apply over an installed membrane; bed bricks/tiles with full, void-free joints
- 3Cure silicate joints (acid-wash / "souring") before chemical exposure per supplier schedule
- 4Select chemistry by exposure: silicate for mineral acids, furan/epoxy for organic or mixed media
Disclaimer: values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.