Fireclay Bricks | Shaped Refractories
AL-40 Fireclay Bricks
- IS 8
- 40% alumina
- Formerly STD-40
- SK 34
40% min
Al₂O₃ Content
Typical value
30 MPa min
Cold Crushing Strength
Typical value
1200°C
Max Service Temperature
Typical value
3.0% max
Fe₂O₃ Content
Typical value
23% max
Apparent Porosity
Typical value
- Supplying refractories since 1980
- Dispatch from Delhi
- Same-day dispatch of standard stock items
- Pan-India & export
Technical Specification
Typical values. Exact values depend on manufacturer, formulation and applicable test standard.
Chemical Composition (Typical)
| Parameter | Value |
|---|---|
| Al₂O₃ content | 40% min |
| Fe₂O₃ content | 3.0% max |
Physical Properties (Typical)
| Parameter | Value |
|---|---|
| Bulk density | 2.10 g/cc |
| Apparent porosity | 23% max |
| Cold crushing strength | 30 MPa min |
| Thermal conductivity | 1.5 W/mK max @1000°C |
| Refractoriness under load (RUL) | 1300°C min |
| Max service temperature | 1200°C |
| Standard brick size | 230 × 115 × 75 mm |
AL-40 Datasheet
Chemical analysis, physical properties, test methods and available sizes for AL-40 Fireclay Bricks, shared on request.
Key Characteristics
Taken from the AL-40 catalogue values above.
Alumina content
40% min Al₂O₃
Service temperature
Rated to 1200°C
Crushing strength
CCS 30 MPa min
Standard size and shapes
230 × 115 × 75 mm; shapes to drawing
Bulk density
2.10 g/cc
Typical Applications
Specified for AL-40
Steel & iron
Soaking pit walls (Hot-face duty with repeated heating)
Power, boilers & incineration
Waste incinerator linings (Higher temperature and ash attack)
Furnaces & linings
General furnace hot face (Highest-rated IS 8 fireclay grade)
Also used across the fireclay bricks range
Power, boilers & incineration
Boiler back walls & settings
Furnaces & linings
General industrial furnace linings; Backup linings behind working lining
Kilns & ceramics
Kiln car superstructures
Available Shapes
Straight Brick
Wedge Brick
Arch Brick
Skew & Special Shapes
Standard brick 230 × 115 × 75 mm. Shapes to drawing, sample or requirement.
Arch, wedge, skew and special shapes are available against drawing.
FAQ
What is AL-40?
AL-40 is the 40% min Al₂O₃ grade in our fireclay bricks range, rated to 1200°C. Typical catalogue values: Al₂O₃ content 40% min; Fe₂O₃ content 3.0% max; bulk density 2.10 g/cc; apparent porosity 23% max; cold crushing strength 30 MPa min; refractoriness under load (RUL) 1300°C min; thermal conductivity 1.5 W/mK max @1000°C; max service temperature 1200°C. It is also referred to as 40% alumina, STD-40 and SK 34. Standard: IS 8. Confirm the exact figures on the grade datasheet before specifying.
What is the alumina content of AL-40?
AL-40 carries 40% min Al₂O₃ with Fe₂O₃ 3.0% max. Export enquiries may quote SK 34 for this grade; we match SK codes by alumina content.
Where is AL-40 commonly used?
AL-40 is typically specified for soaking pit walls, waste incinerator linings and general furnace hot face. Applications across the fireclay bricks range also include boiler back walls & settings, general industrial furnace linings, kiln car superstructures and backup linings behind working lining. Send us your operating conditions and we will confirm the grade.
What shapes and sizes are available for AL-40?
The standard brick is 230 × 115 × 75 mm. We also supply straight, wedge, arch, end arch, side arch, circular, skew and split shapes, and special shapes to drawing. Send the drawing and quantity for a quotation.
How do I select between AL-35 and AL-40?
AL-35: 35% (nominal) Al₂O₃, rated to 1200°C. AL-40: 40% min Al₂O₃, rated to 1200°C. Higher alumina generally brings higher refractoriness and slag resistance. Send us your application and operating temperature and we will confirm the grade.
Can you supply custom shapes as per drawing?
Yes. Arch, wedge, skew and special shapes are available against drawing, sample or requirement. Send the drawing, dimensions and quantity through the quote form, WhatsApp or +91 98999 57888.
Need AL-40, or unsure between AL-35 and AL-40?
Send us your application, operating temperature, dimensions and quantity. Our refractory team will recommend the suitable grade and supply route.
Technical support
Grade selection from our refractory team
Manufacturer-backed
Supplied from established refractory makers
Pan-India & export
Supply across India, GCC, ASEAN and Africa
Other Fireclay Bricks Grades
All grades in the fireclay bricks range.
Values are typical and compiled by Shanker Agencies Pvt. Ltd. from standard industry data and published manufacturer specifications. They are indicative, not a guarantee. Confirm the exact grade datasheet before specifying. For a certified datasheet or quotation, contact info@shankeragencies.com or +91 98999 57888.
AL-40 Fireclay Bricks
40% min · 30 MPa min